24V High Capacity (216 Watt-Hour) Light Weight Lithium Ion Battery for electric bicycles and other devices that require high power. Made with high quality Panasonic Lithium Ion cells.
| 1 |
Handlebar |
| 2 |
4-Level LED indicator |
| 3 |
Key lock |
| 4 |
Lead rail connecting path |
| 5 |
Charging input jack |
| 6 |
15A Fuse |
| 7 |
5-Pin circular connector receptacle |
Features:
Safety Equipment
- - Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
Specifications:
| Model No. |
|
| Cell Brand |
|
| Cell Code |
|
| Chemistry |
|
| Voltage |
- Nominal Voltage: 25.2 V
- Minimum Voltage: 20.5V
- Maximum Voltage: 29.75V
|
| Capacity |
|
| Rate |
|
| Configuration |
|
| Inner Resistance |
|
| Charge Voltage Limit |
|
| Max. Charge Current |
|
| Continuous Discharge Current |
|
| Burst Discharge Current |
|
| Size |
- 94.00 x 77.00 x 204.00 mm (or 3.8" x 3.1" X 8")
|
| Weight |
|
| Operate Temp. Charge |
|
| Operate Temp. Discharge |
|
| Storage Temp. |
|
| Cycle Life |
|
| PCB Safety Function |
- Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
Small Size & Light Weight:
Size Comparison
Using Lithium-ion battery offers many advantages over older SLA (Sealed Lead Acid) battery because of Lithium-ion battery's high energy density, small size, and low weight. A typical Lithium-ion battery may only has
1/4 of weight and
1/2 of size compare to same capacity traditional heavy bulky Sealed Lead Acid batter.
This battery weight is less than 4 pounds. A same capacity Sealed Lead Acid battery may weigh around 16 pounds.)
Package Contents:
The battery comes with a AC charger and output cable. The AC charger can charge the battery from 100V ~ 240V AC power source.
Battery Charging:
Battery can be recharged with the provided battery AC charger.
Output Port:
The output cable provide output with 2 wires: one wire is +24V, one wire is ground.
On / Off Switch:
The battery has a On /Off switch. The LED at on/off of the battery glows when power is on.
LED Display:
The Four-level LED indicates current power status.
Safety Features:
- Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
|
Battery can be installed and removed easily by using the easy-carrying handlebar. |
|
Battery can be recharged either by fastening on the bike or by itself with the provided AC adapter. |
|
|
|
The Four-level LED indicates current power status. |
|
The LED at on/off of the battery glows when power is on. |
|
|
|
The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge. |
|
The multi-pole circular connector enables effective and proper battery contact. |
|
|
Accessories:
1. AC Charger
- Size: 115.15 x 58.90 x 31.30 mm
- Input Voltage: 100-240 V
- Output Voltage: 29.7 V
- Output Current: 1.5 A
- Safety Requirements: CCC, CE
|
|
2. Power Cord
American Type Adapter Power Cord, Length: 1000 mm
3. Output Cable
|
|
|
Model No.:K1
|
Standard Package:
Battery pack comes with a AC charger and output cable. The AC charger can charge the battery from 100V ~ 240V AC power source.