Power any device use its own AC power adapter. This power station comes with a 300 Watt-hour super high capacity rechargeable lithium ion battery and a 250W power inverter that converts the battery power to a 110V AC power just like the power source in your office or home wall outlet. Just link the power inverter to the battery, then plug your device AC power adapter to the power inverter.


Battery Features:

Small Size and Light Weight:

This battery weight  is only  around 5.1 pounds (same capacity Lead-Acid battery will be around 20 pound).




 Using Lithium-ion battery  offers many advantages over older SLA (Sealed Lead Acid) battery  because of  Lithium-ion battery's high energy density, small size, and low weight.   A typical Lithium-ion battery may only has 1/4 of weight and 1/2 of size compare to same capacity traditional  heavy bulky Sealed Lead Acid battery.

LED Display:

The Four-level LED indicates current power status.
AC Charger:

This battery comes with its own AC charger that can charge the battery from any 110V ~ 240V AC power source.

On/Off Switch:

The LED (at the power button controls on/off of the battery) glows when power is on.

Safety Features:

• Water-resistant and firm ABS plastic casing.
• - Built-in PCB protection.
• - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
• - The internal pack is stabilized by braces.
• - Avoiding mechanical accidents caused by vibration.

Battery Specifications:

Model No.	BX3691B
Cell Brand	Panasonic
Cell Code	CGR18650CG
Chemistry	Lithium-ion
Voltage	Nominal Voltage: 36 V Minimum Voltage: 30V Maximum Voltage: 42.55V
Capacity	9 Ah (324Wh)
Rate	324 Watt-hour
Configuration	10S4P
Inner Resistance	≤75 mΩ
Charge Voltage Limit	42.5V
Max. Charge Current	2 A
Continuous Discharge Current	13 A
Burst Discharge Current	30 A
Size	180.00 x 123.00 x 92.00 mm  ( or  7" x  5" X 3.8")
Weight	2.33 kg ( or 5.1 pound)
Operate Temp. Charge	0～45 ℃
Operate Temp. Discharge	-20～60 ℃
Storage Temp.	-20～40 ℃
Cycle Life	500 Times
PCB Safety Function	Cell balancing Over-discharge Over-current protection Over-charge Temperature protection Secondary protection

 Power Inverter Features:
The power inverter converts the battery DC power to 110V AC power. It has two output universal AC output sockets that can accept any style AC plugs. The inverter total continuous output can be as high as 250W. Its output wave from is pure since wave.

The power inverter has a special designed connector that can link to the battery.

Advantages of Pure Sine Wave inverters over modified sine wave inverters:
a) Output voltage wave form is pure sine wave with very low harmonic distortion and clean power like utility-supplied electricity.
b) Inductive loads like microwave ovens and motors run faster, quieter and cooler.
c) Reduces audible and electrical noise in fans, fluorescent lights, audio amplifiers, TV, Game consoles, Fax, and answering machines.
d) Prevents crashes in computers, weird print out, and glitches and noise in monitors.
e) Reliably powers the following devices that will normally not work with modified sine wave inverters:
Compared to the traditional inverters, which output in modified sine wave, AC power in pure sine wave is more similar to commercial power. The electronic appliances run cleaner, cooler, and quieter when running on pure sine power. As a result, pure sine inverters save energy costs and extend the life of appliances.

The pure sine inverter also reduces electronic interference, making it a better alternative for operating sensitive audio/video equipment and medical devices. Appliances with dimmers, speed controls, and certain battery chargers may require pure sine power to operate.

Pure Sine Inverters are especially designed to increase the efficiency and running time of electronic appliances and motors. Our Inverters operate at less than 3–5% of Total Harmonic Distortion (THD) on average and 90% efficiency across the line.

Accessories:

1. AC Charger

Size: 115.15 x 58.90 x 31.30 mm Input Voltage: 100-240 V Output Voltage: 42.5 V Output Current: 1.5 A Safety Requirements: CCC, CE

2. Power Cord