New model! Replacement of PM85-22 battery. This PM85-25 battery has about 12% more capacity than previous PM85-22 model.
Small size, High capacity, Long Run Time. This battery has 25 Watt-hour
For your reference and comparison, most Digital
Cameras/Video Camcorder's standard batteries only have 5Wh capacity. A
typical cell phone battery capacity is only about 3Wh, a iPhone
internal battery capacity is around 5Wh. This may help calculating your
expected run time when you use this battery for your device.
High capacity. Most Digital Cameras/Video Camcorder's standard batteries only have 5Wh~10Wh capacity. This battery has 25Wh (Watt-Hour) capacity.
For reference, an AA battery has about 2.7Wh capacity (1.8Ah at 1.5V).
This may help calculating your expected run time.
Ultra light weight design.
Devices which require 5V, 8.4V or 11V power supply, such as
network routers, BiX Pocketsize USB or Firewire hard drives, BiX Slim
USB or Firewire Optical Drives. Compatible with following Cameras/video cameras: Sony, JVC, Panasonic, Fuji, Olympus, Nikon, Casio, Kodak, HP, Minolta.....
as well as most cameras or devices which require 5 to 12 volt power supply.
No memory effect. Can be recharged at any time regardless of the amount of discharge.
Built-in battery gauge which displays power level of the battery pack.
AC quick charger included. Temperature and over-voltage/current protection.
Universal camera cable included. Compatible with most all digital cameras/video cameras or equipment.
Can also be used as an external power supply for any device
such as portable Radio, CD/VCD/ DVD player etc...which requires 5 to 12
volt power input.
How this battery works:
1. This battery has it own battery chargers. You can charge
the battery from any 110V or 220V AC power source with the included
Wall AC Charger, or charge it from a car cigarette lighter with the
included Car DC Charger.
2. After the battery has been fully charged, set the voltage output of
the battery close to your device DC power input requirement which is
same as your AC power adapter's DC output voltage.
battery has a switch to set the voltage output at 5V or 8.4V, and it
also has a 11V DC output plug. Set the voltage close to your device's
DC input requirement
3. Select the right connector tip:
Included with the battery pack is a universal cable with 8 connector
tips that work with most digital cameras/video camcorders on the
market. With the connector tip not connected to the adapter cord,
locate the correct tip by fitting the tip into the device DC Jack. The
tip should fit snugly in the DC jack
you have selected the proper connector tip, connect the tip to the
battery universal cord. 4. Connect the External Battery Pack to your
digital camera/video camcorder (or other devices) power input jack
(which is the same jack AC power adapter usually plugs into). Now you
can power your digital cameras/video camcorders (or other devices) from
this External Battery Pack . The Lithium-Ion rechargeable mini battery
pack has ultra long runtime for most digital cameras/video camcorders
on the market, as well as many new models to be released. Another
useful feature on the this mini battery pack is its battery gauge which
displays the amount of power left in the battery. At a press of a
button. users can immediately know if recharge is necessary. Also
included with each pack are the AC Quick Charger, Universal
Camera/Power Cable w/modular plugs, and carrying case .
AC Quick Charger:Simply
plug it in any compatible AC outlets to charge the battery. It is
compatible with both 110V and 220V power source. AC Input can be:
100V-240V Universal Cable Kit:Using
a modular design,there is only one cable. With a variety of modular
connectors available. The mini battery pack can be made instantly
compatible with a wide array of digital cameras/ video camcorders/
portable DVD/VCD players or other devices.
Carrying Case:The carrying
case features a belt-clip with a revolutionary bottom hook that helps
to prevent the pack from slipping off of your belt.
Battery Capacity: 50Wh
(most camcorder's standard batteries only have 5Wh~10Wh capacity. For
example, Sony NP-FM50 battery is 8.5Wh, runnig 2~3 hours, this battery
has 2.5 more times capacity, so it can run same camcorder up to 5~7
hours) Battery Output Voltage: 11V/8.4V/5V
The capacity at different DC output:
5V----10000mAh; 8.4V----5950mAh; 11V----4500mAh
Maximum Current Output: 1500mA
Battery Gauge: Four stage charge level indicator
Charge Current: 2000mA
Charge Time: (fully discharged) 3Hours(4hours Maximum charge)
Charger Output Power: 12.6V(AC Adapter included)
Size: 2"x 3"x 1.6"
This battery is compatible with: Devices which require 5V, 8.4V or
11V power supply, such as network routers, BiX Pocketsize USB or
Firewire hard drives, BiX Slim USB or Firewire Optical Drives.
TRV16E, TRV17E, TRV18E, TRV25E, TRV27E, TRV40E, TRV900E,
TRV940E, TRV950E,VX2000E, PC9E, PC110EPC115E, PC120E... DSC-F707,
DS35, DS55, DS15, DS25, DS28, DS38, DS88, DS30, DS50... JVC: DVL300/500/800/310/315...
Sony Camcorders, Model:
FinePixA200/A202/A203/A303/F401Z/F601Z/ S602Z/S2 Pro...
Compatibility: The above
compatibility list is just a partial list. If your device external DC
input requirement is 5V, 8.4V or 11V with positive polarity and the DC
plug shape looks like one of connectors in following picture, then this
battery should be compatible with your device.
The battery output cable and connectors are configured as positive polarity, which meet the needs of most of devices.
optional negative polarity cable & connectors set is available at
special request. Warranty: We carry 1 year warranty for this battery
against manufacturing and quality defects! The life of a rechargeable
Li-Ion battery operating under normal conditions is generally around
500 charge-discharge cycles.
Our optional Consumer
Electronics Plug Tips will make this battery works for a lot of devices that
need 5V/8.4V/11V DC power.
How to use the optional Plug Tips with this
1. One of the connectors come with the battery pack will
fit our optional plug tips. First, use this connector as a bridge, install this
connector to the output cord like this:
Then install the optional Plug Tips you selected on the bridge connector
Now you are ready to use the battery with the optional plug tip that fits your