DC Power Connector Plug Tip for IBM Lenovo Laptop Computers.
size: 7.9mm (Outer Diameter) x 5.55mm (Inner Diameter) with center
This DC Power Plug Tip converts a 5.5/2.5mm connector (Outside Diameter 5.5mm, Inside Diameter 2.5mm) to a round shape male connector with middle pin that can fit DC input power jacks of a lot of IBM/Lenovo notebook computers such as
IBM ThinkPad R60 R60, R60e, R60i, R61, R61e, R61i
IBM ThinkPad T60 T60, T60p, T61 T61p series
IBM ThinkPad X60 X60, X60s, X60 Tablet, X61, X61s, X61 Tablet
IBM ThinkPad Z60 Z60m, Z60t, Z61e, Z61m, Z61p, Z61t
Lenovo C100, C200
Lenovo N100, N200
Lenovo V100, V200
IBM/Lenovo Thinkpad 3000 Series:
3000 Y100, Type 8825
3000 Y500, Type 7761
IBM / Lenovo ThinkPad X200, Type 7454, 7455, 7457, 7458, 7459
IBM / Lenovo ThinkPad X300, Type 2748, 2749, 4052, 6476, 6477, 6478
IBM / Lenovo ThinkPad X301, Type 2774, 2776, 2777, 4057,
1. The above compatibility list is just a partial list. The connector tip may
actually work for more models.2. Some models listed above have many different sub-models which may not use
this connector. Please compare your current connector with this picture to make sure this
connector tip will work for you:3. The power adapter you are using with this connector tip should have the correct voltage and power that meet your computer requirement. Most IBM/Lenovo laptops
listed above need 19V~21V DC input.4. This connector tip can plug in to a 5.5mm x 2.5mm connector only If your current connector is
not a 5.5mm x 2.5mm connector, then this connector tip will not work for you.
Please read info below to fully understand how to use this connector
tip.How to use this connector tip?
This connector's rear is a 5.5 x 2.5mm female jack:
It can plug to a 5.5 x 2.5mm connector to form a new size connector:
Above pictures are just for understanding how the connector tip works. Actual connector tip may be different from the connector tip shown in pictures.Important Note*: If your original connector is not a 5.5 x 2.5mm connector, you can not use this connector plug tip.
If you are using this connector tip with some of universal batteries or power adapters, you need to find the 5.5 x 2.5mm standard connector tip that comes with the batteries or power adapters first, and plug it onto the battery or power adapter output cord, to form a standard 5.5 x 2.5mm connector, then plug this connector tip to the 5.5 x 2.5mm connector to form a new size connector.