 |
 |
 |
|
DC Power Connector Plug Tip.
Connector size: 6.3mm (Outer Diameter) x
3mm (Inner Diameter).
Compatible laptop models: (The following is just a partial list.We are unable to verify each laptop model listed here, so please use the above picture of this connector tip to make sure it is the right one for you.)
IBM: ThinkPad 350, ThinkPad 500, ThinkPad 510, ThinkPad 730
MEC: Versa
LX, Versa LXi, Versa SX, Versa S3000
CANON: NoteJet 486, NoteJet I,
NoteJet II, NoteJet III, NoteJet IIICX
Gateway: M350, M675
Mitac:
6120
Toshiba:
Satellite PSP20U-1LKF3V, Satellite
PSP10U-0DUJP6, Satellite P10 Series, Satellite P10-S429, Satellite P10-S4291,
Satellite P15 Series, Satellite P15-S409, Satellite P15-S4091, Satellite
P15-S420, Satellite P15-S470, Satellite P15-S479, Satellite P25-S487, Satellite
P25-S507, Satellite P25-S508, Satellite P25-S5091, Satellite P25-S5092,
Satellite P25-S607, Satellite P25-S608, Satellite P25-S609, Satellite A35
Series, Satellite A35-S1592, Satellite A35-S1593, Satellite A35-S209, Satellite
A35-S2091
How to use this connector tip? This connector's rear is a 5.5 x 2.5mm female jack:  It can plug to a 5.5 x 2.5mm connector to form a new size connector:  Above pictures are just for understanding how the connector tip works. Actual connector tip may be different from the connector tip shown in pictures. Important Note*: If your original connector is not a 5.5 x 2.5mm connector, you can not use this connector plug tip.If you are using this connector tip with some of universal batteries or power adapters, you need to find the 5.5 x 2.5mm standard connector tip that comes with the batteries or power adapters first, and plug it onto the battery or power adapter output cord, to form a standard 5.5 x 2.5mm connector, then plug this connector tip to the 5.5 x 2.5mm connector to form a new size connector.
Important: This Connector Does Not Convert VoltageThis is a connector adapter only. It does not contain electronics to increase, decrease, or regulate voltage. Before connecting your equipment, make sure the output voltage, polarity, and available current from your battery or power adapter are compatible with the device you want to power.
|
|
|
 |
|
 |
|
