 |
This is a 144 Watt-hour high capacity lightweight V-Mount battery with Mounting Plate and AC charger. Battery output voltage is variable from 12V to 16.8V.
Battery Features:
Battery has a 5-level LED indicator to allow the user to see the remaining power.
This battery also has a D-Tap DC port for using as an alternative charging port or output port.
Specification:
Product Code: V150-NL261D
Voltage: 14.4 V
Dimension: 155.20 x 85.15 x 52.0 mm ( or 6.1" x 3.3" x2")
Color: Dark Grey
Cells Info
|
Chemistry
|
Capacity
|
Rate
|
Weight
|
Cell
|
|
Li-ion
|
10 Ah
|
144Wh
|
0.77 kg ( 1.7 lb)
|
Panasonic
|
Battery Output Voltage:
The battery output voltage range is 12V ~ 16.8V, nominal voltage is 14.8V. When the battery is fully charged, its output voltage is 16.8V. The output voltage will decrease gradually and finally will cut off at around 10V. Most of the time, the voltage will be around 14V to 16V.
Mountable Plate:
The battery pack comes with a mountable plate. You may mount this plate on your device. Connect the two power output wires to your device power input. Battery can easily slide on this plate to provide power output to the wires and D-Tap connector on the plate.
 Top View
Bottom View
This V-Mount adapter plate converts most cameras to a V-Mount battery interface. Multiple mounting holes fit virtually all professional video cameras as well as many manufacturers’ monitors, hard drives, test instruments, etc.
This V-Plate has a 2 pin D-Tap on the side for powering an on-board camera light or accessories. It allows direct mounting of V-Mount batteries to the back of a wide range of professional 12V cinema cameras (i.e. select Sony, AJA, Panasonic, JVC & Ikegami cameras).
The D-Tap Output port (unregulated) is used for powering cameras, onboard recorders, lights, monitors, etc.
Battery can slide on the plate and locked in place. It can be released from plate by simply press the release button.
AC Charger:
You can order the battery with our Portable AC Charger. The portable AC charger will charge the battery through the D-Tap port on battery through a D-Tap cable, which will be included with the charger.
Portable AC Charger: Small size: 4.7" x 2.4" x 1.3". Light weight: 10 oz.
Package contents:
Battery x 1 Mount plate x 1 AC charger x 1
Storage Guidelines
Temperature Range: The battery should be stored within a temperature range of -20°C to 60°C. For optimal performance and to prolong overall battery lifespan, it is recommended to maintain storage temperatures between 0°C and 20°C.
Short-Term Storage: If the battery will be stored only for a short period, it is best to store it in a discharged state. This minimizes stress on the internal cells during inactivity.
Long-Term Storage: For extended storage periods, recharge the battery for approximately 20 minutes every five months. This periodic charging prevents deep discharge, which can permanently reduce capacity.
Before Reuse: After any storage period, the battery should be fully recharged before being put back into service to ensure reliable performance.
Battery Protection Circuitry
1. Over-Charge Protection
If the battery voltage exceeds a preset safety threshold during charging, the protection system will automatically stop the charging process to prevent overcharging and potential cell damage.
In this case, the charger may display a charging fault, although the battery’s LED indicators will continue to show charge capacity.
If over-charge protection activates, contact your supplier for further assistance before attempting to use the battery again.
2. Over-Discharge Protection
If the battery voltage drops to 9.2V during discharge, the protection circuit will engage and the LED indicators will switch off.
Once recharged, the protection resets automatically: when the battery voltage reaches 12.0V, the LEDs will reactivate, indicating normal operation has resumed.
3. Over-Current Protection
If the battery is exposed to unusually high discharge currents, sudden inrush currents, or a direct short circuit, the protection function will stop battery discharge to prevent overheating or damage.
During this state, LED indicators will not function.
The over-current protection resets automatically once the battery is disconnected from the equipment and the abnormal current condition is removed.
4. Thermal Protection
If the internal temperature of the battery pack rises beyond a preset safety limit, a thermal fuse will activate and permanently cut off power supply.
Once this fuse has been triggered, the battery cannot be reset.
If this occurs, discontinue use immediately and contact your supplier for replacement or further guidance.
|
|
|