BX948 is a 9V external battery providing an extra power
source for portable DVD players, digital
frames and other devices that require 9V DC
power. It is as small as a novel and has a user-friendly and simple design.
9V output voltage
48 Watt-hour capacity. (13000Ah)
Can be recharged about 500 times.
Has its own AC charger
Comes with 4 different DC connectors for different devices.
How long can
this external battery run ?
This battery will run most portable
DVD players from 5~12 hours, depending on the screen size and brightness
adjustments. This battery's capacity is 48Wh(Watt-hour). For your reference, here are
some capacity comparisons:
4 AA batteries: Less than 12Wh
Most Internal DVD Player Batteries: 20Wh~ 30Wh
|Input for charging
||152.90 x 93.10 x 23.10 mm ( 6" x 3.7" x 0.9") |
||4 level LED display|
|Built-in Protection Circuit:
||- Over-charge |
- Over current
- Short circuit
|Included in Standard Package:
||- Battery x 1 pc |
- AC Adapter x 1pc
- DC Car Adapter
- Power Cable x 1pc
- Plug Tip x 4
How to use this
Part I. Charge the Battery
Charge with the supplied AC adapter
connected to the battery input DC jack.
During charging process, a LED light will glow red.
The battery might become warm while charging.
When battery is fully charged, the LED light will turn
Unplug the USB cable / adapter ASAP once the
battery is fully charged.
Part II. Power Status
Different lighting condition of the LED display shows
respective current power level of the battery:
Condition of LED display
Less than 25% available
Reminder: Do not exhaust the battery. Recharge before
power is completely consumed.
Part III. Use the Battery
Choose a right plug tip that can snugly plug into the DC jack of
your DVD player.
Attach the chosen tip to the supplied power cable.
Make sure the Polarity* is correct and connect the
terminal of other head of power cable with the DVD battery. When the battery and
your device are connected with each other, it begins to provide power.
Reminder: Please fully charge the battery prior to the
first use. Polarity
The default battery
output cable and connectors are configured as positive polarity, which meet the
needs of most of devices. Please make sure your device polarity is positive, if
not, you can not use this battery.
Positive polarity means inside the connector is positive, outside the
connector is ground.
It is CRITICAL that you determine the correct
polarity needed for your device before using the battery. FAILURE TO DO SO MAY
RESULT IN SEVERE DAMAGE TO YOUR PRODUCT!
If your device needs negative
polarity, do not use this battery.
To determine the correct
polarity for your device, inspect the DC adapter jack or the label of your
product thoroughly for information about the products polarity. There will be a
symbol with a plus sign on one side and a minus sign on the other with a circle
between them. The circle will have an opening so that it looks like a "C". If
the opening of the circle is on the side with the plus sign the polarity is
positive. If the opening is on the side with minus sign the polarity is
negative. If you cannot find a polarity sign on your product you need to call
the product's manufacturer to find out what the polarity is.
Part IV. Safety Cautions
|1. Do not subject the battery to extreme
|2. Do not overcharge the battery. It may shorten its life.|
|3. Do not immerse in water.|
|4. Do not attempt to open or break apart the
|5. Do not throw the battery in fire or
attempt to burn it.|
|6. Keep the battery away from excessively dry
or humid environments.|
|7. Do not use the battery if it has been
subjected to shock or damage; take it to qualified technician for inspection and
Plug Tips: (Move the mouse to the picture
for more details)
For DVD Player & Digital Frame
D1500, D1510, D1530,
D1708. D1710, D1730, D1830, VBP50
CH-LDV702B, CH-LDV707B, CH-LDV712B, CH-LDV1010B
GVP-5850,Go Video GVP-7811
DVD-5820, DVD-9510, IDM830, IDM1731, IDM1810, IDM9530, IDM9820
MDP-1710, MDP-1720, MDP-1770, MDP-1810, MDP-5510, MDP-5830, MDP-5860,
DRC600N, DRC605N, DRC608N,
DRC612N, DRC618N, DRC622N, RC5400P
DVD-1810, DVD-5820, DVD-9510, DVD-960, DVD-9610, SDP-1560, SDP-1720, SDP-1731,
SDP-1770, SDP-1810, SDP-1830, SDP-1910, SDP-5850, SDP-5860, SDP-5861X, SDP-9530,
|Connector Tips fit for Z2|
M270, M271, M280,
M281, M520, M530
SV1011, EasyShareSV811, EasyShareSV710, EasyShare EX1011, EasyShare EX1811,
EasyShare M1020, EasyShare M820
10FF2M4, 10FF3CME, 8FF3FPW, 8FF3CDW
DVD-L50, DVD-LA85, DVD-LA95, DVD-LV55, DVD-LV57, DVD-LV60, DVD-LV70, DVD-LV75,
DVD-PA65, DVD-PV40, DVD-PV55
SDP-1200, SDP-1400, SD-P1200, SD-P1400, SD-P1500