11.1V Uninterruptible power supply with battery for Router, CCTV, VoIP, NAS, IoT and more...
This package comes with a CP100 lithium ion battery, a 12V power supply/battery charger.
When AC input has power, it can provide 3 + Amps uninterrupted DC power directly from AC charger without using battery power. The whole unit can provide maximum output up to 8 Amps power when combine battery and AC charger power together. It is an excellent backup battery for 12V CCTV Surveillance Cameras and many other devices that require 10V to 12V DC power.
Applications: Router / Modem / Switch / CCTV / IP camera / VoIP phone / Security Alarm System / Access control system / Home Automation IoT Devices
AC input : Full range (90 ~ 264V AC)
DC Output : 10V ~ 12.6V DC
Running Time: The CP100 battery has a capacity of 99.9 Watt-Hours. When AC input has no power, the battery itself can last 8 hours with output at 1 Amps, or 80 hours with output current at 100mA.
CP100 Battery x1
Battery AC Charger x 1
Split Dongle x 1
How to use this battery:
This battery has two wires with a 5.5 x 2.5mm Female barrel connector. This connector can be used as battery output port and battery charge input port.
This battery's actual output voltage range is between 10V to 12.6V. When the battery is fully charged, its maximum output voltage is 12.6V. The output voltage drops gradually during discharging process, and the cut off voltage is 9V. Usually, the battery output voltage will be around 10.5V ~ 11.5V .
Please charge battery with
authorized 12.6V Lithium ion battery chargers only. Maximum charge current 4 Amps.
Please monitor the charging process and react to potential problems that may occur. If you cannot monitor the battery, please make sure to leave it on an isolated fireproof area and away from other flammable materials.
AC Charger Dual Color LED Indicator:
LED indicator on AC charger will be red when the battery is under charging. It will turn to green when battery is fully charged.
Use battery as 12V UPS ( Uninterrupted Power Supply)
With the Y25 split dongle, you may charge battery while using battery.
When connected AC charger with battery, if powered device needs power less than charger input power, the battery may used as a 12V UPS. If powered device needs more power, the AC charger and battery pack can supply power together.
Ultra light weight design.
No memory effect. Can be recharged at any time regardless of the amount of discharge.
Built-in battery gauge displays the power level of the battery pack.
AC quick charger included. Temperature and over-voltage/current protection.
Built-in charging control circuits. This battery can be safely charged by any 12V to 24V regular power adapter, solar panel or other 12V to 24V DC power source.
The battery output cable and connectors are configured as positive polarity, which meets the needs of most devices.
- Battery Capacity: 99Wh
- Battery Output Voltage: 10V ~ 12.6V
- Maximum Current Output: 8A
- Max. Charge Current: 4A
- Charge Time: 3 ~ 4 Hours with 12.6V 3A Charger
- Size: 5.5" x 2.2"x 1.5" ( 140 x 56 x 38mm)
- Weight: 1.3lb (0.59 kg)
Optional Battery Hard Case:
You may order battery with optional hard case for protection like this:
This hard case can provide more protection for battery. It is optional, not standard. Standard battery has soft wrap. It is recommend to order battery with this optional hard case if you need to use battery in an environment that no protections.
Use battery with DD90M DC to DC Converter together:
You may use this battery with BiXPower DD90M-16V DC to DC converter to get regulated 16V output voltage, with BiXPower DD90M-19V DC to DC converter to get regulated 19V output voltage, or with BiXPower DD90M-24V DC to DC converter to get regulated 24V output voltage:
DC Converter is
optional, not Included with battery