Two High-Capacity BP100 Batteries for ResMed AirMini CPAP
A compact and flexible portable power solution with two 99.6Wh lithium-ion
batteries. Use one battery for lighter travel or connect both batteries
together when longer operating time is needed.
Portable Power Designed for ResMed AirMini
- Two 99.6Wh lithium-ion batteries provide approximately 199.2Wh total battery capacity.
- Includes a special 24V power cable for ResMed AirMini.
- Use one battery individually for maximum portability.
- Connect two batteries together for extended operating time.
- Compact and slim design makes each battery easy to carry in a backpack, laptop bag, or travel bag.
- Selectable regulated 16V / 19V / 24V Output I.
- Additional DC and USB outputs provide power for many other portable electronic devices.
- Includes both an AC charger and 12V car charger.
- Built-in protection against over-charge, over-discharge, over-current, over-temperature, and short circuit.
99.6Wh Capacity Each Battery — Convenient for Air Travel
One important advantage of each BP100 is its
99.6Wh rated capacity.
This provides substantial portable power while remaining within the
100Wh lithium-ion battery threshold commonly used by airlines and
aviation regulations for passenger travel
.
This makes the BP100 a practical choice for CPAP users who need a
portable CPAP battery for air travel, business trips,
vacations, camping, or emergency backup power.
Important Travel Notice:
Airline, TSA, FAA and international battery transportation requirements
can change, and individual airlines may apply additional restrictions.
Spare lithium-ion batteries are generally required to be transported in
carry-on baggage rather than checked baggage. Always verify the latest
requirements directly with your airline and the applicable transportation
authority before traveling.
Complete Package
Everything needed to use the batteries with a ResMed AirMini is included
in this package.
- 2 × BiXPower BP100 99.6Wh Lithium-Ion Batteries
- 1 × Special ResMed AirMini Power Cable
- 1 × Y25 Split Dongle
- 1 × AC Battery Charger
- 1 × 12V Car Charger
Use One Battery for Maximum Portability
You do not have to carry both batteries every time. Each BP100 can be
used independently to power the ResMed AirMini.
For shorter trips or when minimizing size and weight is important,
simply take one BP100 battery and keep the second battery available as
a backup.
Important: Set Output I to 24V before
connecting the ResMed AirMini power cable.
ResMed AirMini CPAP machine shown for illustration only and is not included.
Connect Two Batteries for Extended Runtime
When additional battery capacity is needed, both BP100 batteries can
be connected together using the included Y25 split dongle.
Before connecting the batteries, set
Output I on BOTH BP100
batteries to 24V
.
Connect one male plug of the Y25 split dongle to Output I on Battery 1
and the other male plug to Output I on Battery 2. The female connector
then provides the combined output connection.
Connect the special AirMini power cable to the combined output of the
split dongle.
With two 99.6Wh batteries, the system provides approximately
199.2Wh of combined battery capacity.
Actual CPAP operating time varies depending on pressure settings,
operating conditions, mask leakage, and other factors.
Compact, Slim and Easy to Carry
High capacity does not have to mean a large, bulky battery. Each BP100
measures approximately
7.2 × 4.2 × 0.9 inches and
weighs only about
1.4 lb.
Its slim profile makes it convenient for travel and allows the battery
to fit easily into many laptop bags, backpacks, and CPAP travel bags.
Versatile Multi-Output Lithium-Ion Battery
The BP100 is more than a dedicated CPAP battery. Its multiple output
ports allow the battery to provide portable power for a wide variety
of compatible electronic devices.
Output I — Selectable Regulated 16V / 19V / 24V
Output I provides three selectable regulated output voltages:
16V, 19V, and 24V.
The voltage is selected using the built-in hardware voltage selection
switch, allowing the BP100 to power many different types of compatible
DC devices.
For ResMed AirMini: Always select
24V before connecting the AirMini power cable.
Additional DC and USB Outputs
Output II — 9V to 12.6V DC
Output II is connected to the battery's internal lithium-ion cells and
has a nominal voltage of approximately 11.1V.
When fully charged, the output voltage is approximately 12.6V and
gradually decreases as the battery is discharged. Output II shuts down
when the battery reaches its low-voltage cutoff.
Output III — 5V USB
The built-in USB output provides
5V DC up to approximately
2.1A
and can be used to power or charge compatible smartphones,
tablets, and other USB-powered electronics.
USB charging cable is not included.
Convenient AC Charging
The BP100 has a built-in charging controller and accepts a wide DC
charging input range of
12V to 24V.
Use the included AC charger to recharge a BP100 battery from a standard
100V–240V, 50/60Hz AC power source.
Charge Two Batteries Together
The included split dongle can also be used with the AC charger to
charge both BP100 batteries together, making it convenient to prepare
both batteries for your next trip.
Charge from a 12V Vehicle Power Socket
The included car charger allows the BP100 to be recharged from a
compatible 12V vehicle cigarette-lighter or accessory power socket.
This is especially useful for road trips, camping, RV travel, and other
situations where standard AC power may not be readily available.
Battery Specifications
|
Model
|
BP100
|
|
Battery Type
|
Lithium-Ion Rechargeable Battery
|
|
Capacity
|
99.6Wh per battery
|
|
Number of Batteries
|
2
|
|
Combined Capacity
|
Approximately 199.2Wh
|
|
Charging Input
|
DC 12V–24V
|
|
Charging Connector
|
5.5 × 2.5mm
|
|
Output I Voltage
|
16V / 19V / 24V selectable regulated output
|
|
Output I Connector
|
5.5 × 2.5mm
|
|
Output I Maximum Current
|
4A @ 16V
3.5A @ 19V
2.5A @ 24V
|
|
Output II
|
11.1V nominal; approximately 9V–12.6V
|
|
Output II Connector
|
3.5 × 1.35mm
|
|
Output II Maximum Current
|
5A
|
|
Output III
|
5V USB, up to approximately 2.1A
|
|
Total Maximum Output
|
65W across all outputs
|
|
Typical Charging Time
|
Approximately 4–6 hours
|
|
Battery Size
|
180 × 110 × 22.5mm
Approximately 7.2 × 4.2 × 0.9 in.
|
|
Weight
|
Approximately 621g (1.4 lb) per battery
|
|
Power Indicator
|
4-level LED battery indicator
|
|
Operating Temperature
|
-20°C to 60°C
|
|
Storage Temperature
|
-20°C to 40°C
|
|
Built-In Protection
|
Over-charge protection
Over-discharge protection
Over-current protection
Over-temperature protection
Short-circuit protection
|
Flexible Portable Power for Your AirMini
The BP100X2-AirMini package gives you the flexibility of carrying
one compact battery when you want to travel light or
connecting
both batteries when you need additional capacity.
With approximately
199.2Wh combined capacity, a
dedicated ResMed AirMini power cable, AC and vehicle charging options,
and multiple DC/USB outputs, this package is a versatile portable power
solution for travel, camping, RV use, and backup CPAP power.
Package Contents
- 2 × BP100 99.6Wh Lithium-Ion Rechargeable Batteries
- 1 × ResMed AirMini Special Power Cable
- 1 × Y25 Split Dongle
- 1 × AC Battery Charger
- 1 × 12V Car Charger
Note: ResMed AirMini CPAP machine is shown for
application illustration only and is not included. Actual operating
time varies depending on CPAP pressure settings, operating conditions,
mask leakage, battery condition, and other factors.
