Super Capacity (300Wh) Battery Pack for ResMed AirSense 10 & AirCurve 10 CPAP Machines

This package comes with a BiXPower super high capacity (300 Wh) lithium ion rechargeable battery with special power connector designed for a ResMed AirSense 10, AirCurve 10 and AirStart 10 series CPAP machines. It may power a ResMed AirSense 10 CPAP machine for 2 ~4 nights with the humidifier turned off.

This battery works with the following AirStart™ 10, AirSense™ 10, and AirCurve™ 10 machines manufactured by ResMed:
• AirStart™ 10 CPAP with HumidAir™ Heated Humidifier
• AirStart™ 10 Auto CPAP with HumidAir™ Heated Humidifier
• AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier

Specifications:

Capacity	300 Watt-hour
Output Voltage /Current	24V /Max. 5 Amps
Size	268 x 150 x 56 mm (10.6" x 6" x 2.2")
Weight	2.2 kg (5 pounds)
Operate Temp. Charge	0～45 ℃
Operate Temp. Discharge	-20～60 ℃
Storage Temp.	-20～40 ℃
Cycle Life	500 Times
PCB Safety Function	Cell balancing Over-discharge Over-current protection Over-charge Temperature protection Secondary protection

How to Use the Battery

1. Charge the Battery:

The battery pack comes with its own AC charger. You can charge the battery from any 100V ~ 240V AC power outlet.

Optional Solar Panel Charger:

The battery pack comes with a AC charger that can charge battery from 100V ~ 240 AC power source. You may also charge this battery from BiXPower solar panel that is compatible with battery.

Solar Panel is optional, not included with standard package.

2. Connect to CPAP machine power input port.

3. Optional extra battery module:

Battery is consist of battery holder and bare battery module. Bare battery module can be removable from battery holder. You may order extra bare battery modules if you need more running time for your device by using same battery holder.

Bare battery module can be removable from battery holder by removing lock rivet. After removing the screw lock rivet from the lock hole on the bottom, the bare battery module can be pulled out from the holder and replaced by another bare battery module.

4. Air Travel Note:

According to FAA, Lithium ion rechargeable batteries are limited to a rating of 100 watt hours (Wh) per battery. With airline approval, passengers may also carry up to two spare larger lithium ion batteries (101-160 watt hours). This battery may be not allowed to aboard airplanes. If you need to travel by air, you may consider BiXPower Two BP100 batteries pack at:

https://www.bixpower.com/product-p/bp100x2-s10cb.htm

Package contents:

Battery x 1
AC charger x 1

Warranty: One Year limited warranty. The one year limited warranty covers manufacturing and quality defects only. Please note that batteries wear out with use. The amount of charge a battery can hold gradually decreases due to usage and aging, which is normal, and this is not the issue covered by warranty.

Battery Running Time: Depending on CPAP Machine setting and running environment, a CPAP machine may need as much as 60W power or as little as 10W power. So the battery running time may vary a lot: from 5 hours to 30 hours. To maximum battery running time, please turn off CPAP Machine humidifier and heater, set the pressure as low as possible.

Company

Shopping

My Account

Help

	E1 DC Power Connector Plug Tip - 3.2 x 0.9mm Male Plug with 4.0x1.7mm Female Jack US$6.95