BiXPower 90W USB-C PD to 24V DC Power Converter

Convert USB-C Power Delivery power into stable, regulated 24V DC power with this compact, lightweight, high-efficiency DC-to-DC power converter.

USB-C power banks, portable batteries, and USB-C PD chargers are convenient power sources for many electronic devices. However, standard USB-C PD power sources typically provide voltage levels such as 5V, 9V, 12V, 15V, and 20V, rather than a fixed 24V output.

The BiXPower DD90M-USBC-24V solves this problem by using a special USB-C PD input cable and a high-efficiency DC voltage converter to provide regulated 24V DC output for compatible electronic equipment.

Its miniature size and lightweight design make it an excellent choice for portable 24V power applications, battery-powered equipment, mobile electronics, and other devices requiring a stable 24V DC power supply.

How to Get 24V DC Power from USB-C

Most conventional USB-C PD power sources do not offer a fixed 24V output. Many USB-C PD power banks and chargers provide up to 20V DC through their standard fixed-voltage profiles.

The BiXPower converter uses a two-stage process:

1. USB-C PD voltage negotiation: The included special USB-C input cable requests 20V DC from a compatible USB-C PD power source.
2. DC-to-DC voltage conversion: The converter transforms the incoming DC power into a stable, regulated 24V DC output.

This allows a compatible USB-C PD battery or power adapter to supply power to equipment that requires 24V DC rather than the standard USB-C PD output voltages.

USB-C PD Input Requirements

The included special USB-C cable is designed to obtain 20V DC power from a USB-C Power Delivery source that supports the 20V PD output profile.

Important: A USB-C connector alone does not guarantee compatibility. The USB-C power source must support USB Power Delivery and provide the required 20V output.

USB-C ports limited to 5V, 9V, or 12V may not operate properly with the included 20V PD input cable.

DC Converter Input Connector

The DC converter uses a 5.5 x 2.5mm female DC input jack with positive-center polarity.

Special USB-C PD Input Cable

The included USB-C PD input cable has a USB Type-C connector on one end and a DC barrel connector on the other end.

When connected to a compatible USB-C PD power source, the cable negotiates a 20V DC output and delivers that power to the converter's DC input port.

Connect the USB-C end to your compatible USB-C PD battery or charger, then connect the DC barrel plug to the converter input jack.

Compact Size and High-Efficiency Design

The BiXPower DD90M converter is designed for applications where installation space, weight, and energy efficiency are important.

• Small dimensions: 2.5 x 1.9 x 0.7 inches (approximately 63.5 x 48.9 x 16.9mm)
• Lightweight: Approximately 2.54 oz (72g), converter only
• High efficiency: Up to 96% conversion efficiency under suitable operating conditions
• Portable design: Convenient for mobile equipment and compact installations

Why High Efficiency Matters

A DC-to-DC converter consumes some energy during voltage conversion. Higher efficiency means less energy is wasted as heat and more energy is delivered to the connected device.

For example, when supplying a 90W load:

At 96% efficiency, delivering 90W of output power would require approximately 93.75W of input power, assuming the converter achieves that efficiency at the operating load.

This can be particularly valuable when powering equipment from portable batteries, where minimizing energy losses helps extend battery operating time.

Converter Input and Output Connections

24V DC Output Cable

The included dedicated 24V output cable provides the regulated DC output for compatible 24V devices.

The standard DC output connector is a 5.5 x 2.5mm male barrel connector. Check your device's connector dimensions, polarity, voltage, and power requirements before connecting.

Additional Features and Protection

• Regulated DC output: Provides stable output voltage for compatible electronic devices.
• Additional USB power output: Built-in USB output supports compatible USB-powered devices.
• Short-circuit protection: Helps protect the converter during output short-circuit conditions.
• Overcurrent protection: Helps limit excessive output current.
• Overvoltage protection: Helps protect against abnormal voltage conditions.
• Overtemperature protection: Helps protect the converter against excessive operating temperatures.
• Protective housing: Designed with protective enclosure materials for electrical equipment applications.

The USB output and main DC output share the available input power and converter capacity. When using multiple outputs, ensure the combined load remains within the available power budget.

Technical Specifications

Note: The converter hardware and the complete USB-C PD configuration have different practical power limits. The main DC output is rated up to 90W in this listing. At 24V, 90W corresponds to 3.75A. Actual available power depends on input source capability, efficiency, temperature, and any simultaneous USB load.

How to Connect the 24V Output Cable

The output cable uses a special connector at the converter end. Proper connector orientation is important.

1. Locate the end of the output cable with the special connector.
2. Identify the small flat surface containing three holes.
3. Orient the connector so that the flat surface faces upward toward the top of the converter.
4. Carefully insert the connector into the converter output port.
5. Connect the 5.5 x 2.5mm male barrel connector to a compatible 24V DC device.

Do not force the connector into the converter. Verify correct orientation before insertion.

Optional Accessories

1. Additional Output Voltage Cables

The DD90M converter supports different regulated output voltages through specially designed output cables.

Besides the included 24V output cable, optional cables are available for other supported output voltages, including:

• 12V DC output
• 16V DC output
• 19V DC output
• 24V DC output (included)

The selected output cable determines the converter's regulated output voltage. Always use the correct cable for the voltage required by your equipment.

2. DC Output Connector Tips

The standard output cable uses a 5.5 x 2.5mm male barrel connector.

For equipment requiring a different connector size or shape, compatible BiXPower C-Series connector tips can be attached to the standard output plug.

These interchangeable connector tips provide greater flexibility for powering different electronic devices without replacing the entire converter.

View BiXPower C-Series DC Connector Tips

Package Contents

The standard DD90M-USBC-24V package includes:

• 1 x BiXPower BX-DD90M2 compact DC-to-DC power converter
• 1 x 24V DC output cable with 5.5 x 2.5mm male barrel connector
• 1 x Special USB-C PD input cable with DC barrel connector

USB-C PD power banks, USB-C chargers, and optional connector tips are not included unless specifically stated in the product options.

Typical Applications

The BiXPower USB-C PD to 24V converter is suitable for a wide range of compatible low-voltage DC applications, including:

• Portable 24V DC electronic equipment
• 24V networking and communication devices
• Portable monitoring and measurement instruments
• Small 24V electronic control systems
• Compatible 24V LED lighting equipment
• Mobile and field-service electronics
• Battery-powered 24V DC applications
• Other electronic devices requiring regulated 24V DC input

Before use, verify that your device's required voltage, operating current, startup current, connector size, and polarity are compatible with the converter.

Some equipment, particularly motors and devices with large startup surges, may require more power than their normal running consumption. Confirm these requirements before connecting.

Frequently Asked Questions

Can a USB-C port provide 24V DC power directly?

Standard USB-C PD fixed-voltage profiles generally do not include 24V DC. This converter obtains a compatible input voltage, typically 20V, and converts it to regulated 24V DC. Some newer USB-C PD implementations support additional voltage profiles, but compatibility with this product depends on the included 20V PD input cable.

Will this converter work with any USB-C power bank?

No. The USB-C power bank must support USB Power Delivery and provide a compatible 20V output. It must also have enough output power for the connected 24V equipment.

Can I use a USB-C laptop charger as the power source?

Yes, a compatible USB-C PD laptop charger may be used if it supports the required 20V PD output and supplies sufficient power for the load.

Does this converter increase the available power?

No. The converter increases the voltage from the negotiated input voltage to 24V, but it cannot create additional electrical power. The output power is limited by the input power and conversion losses.

Can this converter provide 12V, 16V, or 19V?

Yes. The converter supports these additional regulated output voltages when used with the appropriate optional output cable. The included cable provides 24V DC.

Can I use a different DC connector?

Yes. The included output cable has a standard 5.5 x 2.5mm male connector. Compatible BiXPower C-Series connector tips can adapt it to other connector sizes.

Can I charge a 24V lithium-ion battery with this converter?

This product is a regulated DC power converter, not a dedicated lithium-ion battery charger. Do not use it to directly charge a lithium-ion battery unless the battery has a compatible built-in charging system designed to accept a regulated 24V DC input.

Alternative USB-C to 24V DC Converter

BiXPower also offers another USB-C to 24V DC power converter design. Customers looking for a different configuration can compare the alternative product below.

View Alternative USB-C to 24V DC Converter