This package comes with BiXPower BP100 battery, a high capacity (96 Wh), small size ( 180 x 110 x 22.5mm or 7.2" x 4.2" x 0.9"), light weight (621g or 1.4 lb) lithium ion rechargeable battery, a Special Cable that is specially designed for a ResMed AirMini CPAP machine. It can power ResMed AirMini CPAP machines. Provides 1-2 nights of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief disabled.
The battery pack Package comes with one BP100 battery + One ResMed AirMini Special Cable + AC Charger + Car Charger
To use this battery with ResMed AirMini CPAP , just plug in the special cable to battery Port I:
Its compact size allows it to easily fit into a laptop/notebook carry bag.
This battery is made with high quality Panasonic Li-ion battery cells and is compatible with many devices . Set the output voltage at 24V DC, with specially designed cable, it can power ResMed S10 series CPAP Machines.
|Input Charging Port:||Input Voltage Range: DC 12 ~ 24V. Connector Size: 5.5 x 2.5mm|
|Outputs:||Port I: |
Output Voltage: 16V, 19V or 24V selectable
Output Connector Size: 5.5 x 2.5mm
Maximum Output Current: 4A @16V, 3.5A@19V, 2.5A@24V
Port II: Nominal Output Voltage 11.1V
Output Voltage Range 9V ~ 12.6V
Output Connector Size: 3.5 x 1.35mm;
>Maximum Output Current: 5A
Port III: 5V USB Port; Maximum Output Current: 2.A
Total maximum output with all 3 outputs: 65W
|Charging time /Temperature||4-6 hours / 0～45 ℃ |
|Size||180 x 110 x 22.5mm ( or 7.2" x 4.2" x 0.9")|
|Weight:||621g ( or 1.4 lb)|
|Power Indicator:||4 level LED indicator|
|Built-in Protection Circuit:|
-Over-charge ; Over-discharge; Over current ;Over temperature
- Short circuit protection
-20～ 60 ℃
- 20～40 ℃
This Universal External Lithium Rechargeable Battery Pack can provide power for laptop computers, digital cameras, digital photo frames, PDAs, cell phones, DVD players.
This battery features 3 output ports.
Output Port I
Output Port I features 3 different regulated voltages through a hardware volt selection switch: 16V, 19V, 24V. This port can be used to power laptop notebook computers. Please set the port I output voltage close to your laptop power adapter output voltage or laptop's input voltage.
Output III is a 5V USB port. Its maximum output current is 2.1A, which can be used to power or charge iPad, tablet computers and any other device that can be charged from a USB port (USB power cable not included).
Charge the battery: This battery can be charged from any 100V ~ 240V, 50Hz/60Hz AC power source with the battery AC charger.
You may also charge battery from a 12V car cigarette socket:
This battery has built-in charging controller to control the charging process. It can accept a very wide range of voltage for charging. You can use a regular power adapter with 12V to 24V DC power to charge the battery. The battery charge port is a 5.5 x 2.5mm female jack, therefore a 5.5 x 2.5mm male connector is required.
BiXPower BP100 battery x1
AC Charger x 1
Car Charger x 1
AirMini Special Cable: x 1