BiXPower Super High Capacity ( 188Wh) Rechargeable Battery for Philips Respironics DreamStation CPAP Machines BP160-S10

This package comes with a BiXPower BP160 super high capacity (188 Wh) lithium ion rechargeable battery pack and a specially designed power output cable for a Philips Respironics DreamStation CPAP Machines that needs 12V DC power. It can power Philips Respironics DreamStation CPAP Machines for 2-3 nights with the humidifier turned off.

This battery works for Philips Respironics dream stations that require 12V DC Power, such as:

DreamStation CPAP Machine
DreamStation Pro CPAP Machine
DreamStation Auto CPAP Machine
DreamStation BiPAP Pro Machine
DreamStation BiPAP Auto

Its compact size allows it to easily fit into a carry bag.

Battery Technical Specifications

Capacity:	188 Watt-Hours

Colors:	Silver
Chemistry:	Li-ion
Input Charging Voltage:	DC 12 - 19V
Output Voltage:	V + 5V USB Port
Max. Output Current:	Max. 5A for 19V, 5A for 15V, 2.1A for 5V USB Port
Charging time:	4-6 hours
Size:	270.00 x 145.00 x 32.55mm
Weight:	1340g
Power Indicator:	4 level LED indicator
Built-in Protection Circuit:	- Over-charge - Over-discharge - Over current - Over temperature - Short circuit protection
Included in Standard Package:	- Battery x 1 pc - AC Charging Adapter x 1 pc - Adapter Power Cord x 1 pc - DC Car Charging Adapter x 1pc - Power Cable x 1 pc

IN -- Battery input port for connecting to battery charger
OUT -- Battery power output port, connect to output cord.
ON/OFF -- This On/Off switch controls output port power.
USB -- 5V USB port with sliding cover

You can use the 5V USB Port on the battery to charge cellular phones, MP3 players, or other small electronics that can be charged from a 5V USB port. However, the battery pack does not come with any cable or connector tips for this SB port. If you would like, you can purchase our Z4 cable and connector tips, which will work for this port.

Standard Package Contents:

- Battery x 1

- AC Charger & Cord x 1
- DC Car Charger x 1
- Power Output Cable x 1
- 24V DC Converter for ResMed CPAP Machine x 1

How to use the battery:

1. Charge the battery: This battery has its own AC battery charger and 12V car charger. You can charge it from any 110V or 220V AC power source or from a car 12V cigarette lighter socket with the 12V car charger. Both the AC charger and the 12V car charger need to connect to the In port of the battery pack.

2. Set battery output voltage at 12V:

3 Connect special output cable to battery output port:

Warranty: One Year limited warranty. The one year limited warranty covers manufacturing and quality defects only. Please note that batteries wear out with use. The amount of charge a battery can hold gradually decreases due to usage and aging, which is normal, and this is not the issue covered by warranty.

Air Travel Note: According to FAA, Lithium ion rechargeable batteries are limited to a rating of 100 watt hours (Wh) per battery. With airline approval, passengers may also carry up to two spare larger lithium ion batteries (101-160 watt hours). This battery may be not allowed to aboard airplanes. If you need to travel by air, you may consider BiXPower Two BP100 batteries pack at:

https://www.bixpower.com/product-p/bp100x2-s10cb.htm

Battery Running Time: Depending on CPAP Machine setting and running environment, a CPAP machine may need as much as 90W power or as little as 10W power. So the battery running time may vary a lot: from 2 hours to 20 hours. To maximum battery running time, please turn off CPAP Machine humidifier and heater, set the pressure as low as possible.

Company

Shopping

My Account

Help

	5.5 x 2.5mm Male Barrel Power Connector with Wires - 525M US$4.95
	36V 17.4Ah Super High Power Lithium Ion Battery -BX3618H US$699.95