Dual Battery Power Pack for ResMed AirSense 10 & AirCurve 10
Two compact 99.6Wh BP100 batteries for extended CPAP runtime
The
BiXPower BP100X2-S10CB is an extended-runtime portable
battery package designed for compatible
ResMed AirSense 10,
AirCurve 10 and AirStart 10 CPAP/BiLevel machines
.
The package includes
two high-capacity BP100 rechargeable
lithium-ion batteries
. Each battery provides approximately
99.6Wh of energy, giving you approximately 199.2Wh total battery capacity.
99.6Wh Capacity Each Battery — Convenient for Air Travel
One important advantage of each BP100 is its
99.6Wh rated capacity.
This provides substantial portable power while remaining within the
100Wh lithium-ion battery threshold commonly used by airlines and
aviation regulations for passenger travel
.
This makes the BP100 a practical choice for CPAP users who need a
portable CPAP battery for air travel, business trips,
vacations, camping, or emergency backup power.
Important Travel Notice:
Airline, TSA, FAA and international battery transportation requirements
can change, and individual airlines may apply additional restrictions.
Spare lithium-ion batteries are generally required to be transported in
carry-on baggage rather than checked baggage. Always verify the latest
requirements directly with your airline and the applicable transportation
authority before traveling.
Key Features
✓ Approximately 200Wh Total Capacity:
Two BP100 batteries provide approximately 100Wh each for extended CPAP runtime.
✓ Designed for ResMed 10-Series Machines:
Includes a specially configured S10 power cable for compatible
AirSense 10, AirCurve 10 and AirStart 10 machines.
✓ Use One or Two Batteries:
Use one BP100 for a lighter, more compact setup, or connect both
batteries together when you need longer runtime.
✓ Split Dongle Included:
The included split dongle combines the 24V outputs from two BP100
batteries into one output for the ResMed power cable.
✓ Compact & Lightweight:
Each BP100 weighs only about 1.4 lb and has a slim, travel-friendly profile.
✓ AC & Vehicle Charging:
Recharge from a standard AC wall outlet or a compatible 12V vehicle socket.
Extended CPAP Runtime
With both BP100 batteries connected, the system may provide approximately
2–4 nights of operation under typical CPAP pressure,
average breathing conditions and a good mask seal, with high-power
features such as the
humidifier and heated tubing turned off.
Actual runtime varies significantly depending on therapy pressure,
breathing pattern, mask leakage, humidification, heated tubing,
machine settings, battery condition and environmental conditions.
Compatible ResMed 10-Series Machines
This battery package is designed for compatible ResMed AirStart 10,
AirSense 10 and AirCurve 10 machines, including:
• AirStart™ 10 CPAP
• AirStart™ 10 Auto CPAP
• AirSense™ 10 CPAP
• AirSense™ 10 Elite
• AirSense™ 10 AutoSet
• AirSense™ 10 AutoSet for Her
• AirCurve™ 10 S
• AirCurve™ 10 VAuto
Flexible Setup — Use One or Two Batteries
One of the advantages of this dual-battery system is flexibility.
You can use
one BP100 battery individually when you want
a lighter setup, or
connect both batteries together
when you need extended runtime.
Option 1: Use One BP100 Battery
Each BP100 can power a compatible ResMed 10-series machine independently.
Set
Output Port I to 24V, then connect the included
special ResMed power cable between the battery and your CPAP/BiLevel machine.
Option 2: Use Both Batteries for Extended Runtime
To use both batteries together, first set
Output Port I on BOTH
BP100 batteries to 24V
. Connect the two male plugs of the
included split dongle to Output Port I on Battery 1 and Battery 2.
The female end then provides one combined connection for the special
ResMed power cable.
Important — Set Both Batteries to 24V
Before connecting the two BP100 batteries together,
Output Port I on BOTH batteries must be set to 24V.
Do not combine the batteries if their output voltage settings are different.
Compact & Lightweight
Each BP100 measures approximately
180 × 110 × 22.5mm (7.2 × 4.2 × 0.9 in)
and weighs approximately 621g (1.4 lb).
Its slim profile makes it convenient to carry in many CPAP travel bags,
laptop bags and backpacks.
Multiple Output Ports
Each BP100 is a versatile rechargeable lithium-ion battery with
three output ports. In addition to powering compatible ResMed CPAP
machines, it can also power many other compatible portable electronic devices.
Regulated 16V / 19V / 24V Output
Output Port I provides three selectable regulated output
voltages:
16V, 19V and 24V. The voltage is selected
with the hardware switch located next to Output Port I.
For compatible
ResMed AirSense 10, AirCurve 10 and AirStart 10
machines, set Output Port I to 24V.
Special Power Cable for ResMed 10-Series Machines
This package includes a
specially configured power cable
for compatible ResMed AirSense 10, AirCurve 10 and AirStart 10 machines.
One end connects to the BP100 battery system and the other end connects
to the ResMed machine.
A regular DC cable may not operate the ResMed machine correctly even
when the physical connector appears to fit.
BP100 Battery Specifications
|
Battery Model
|
BP100
|
|
Quantity
|
2 Batteries
|
|
Capacity
|
99.6Wh Each / 199.2Wh Total
|
|
Battery Chemistry
|
Lithium-Ion
|
|
Charging Input
|
DC 12V–24V
|
|
Charging Connector
|
5.5 × 2.5mm
|
|
Charging Time
|
Approximately 4–6 Hours
|
|
Size — Each Battery
|
180 × 110 × 22.5mm (7.2 × 4.2 × 0.9 in)
|
|
Weight — Each Battery
|
621g (1.4 lb)
|
|
Power Indicator
|
4-Level LED Indicator
|
|
Operating Temperature
|
-20°C to 60°C
|
|
Storage Temperature
|
-20°C to 40°C
|
Output Specifications
Output Port I:
Regulated 16V / 19V / 24V selectable
Port I Connector:
5.5 × 2.5mm
Maximum Port I Output:
4A @ 16V / 3.5A @ 19V / 2.5A @ 24V
Output Port II:
Nominal 11.1V; approximately 9V–12.6V
Port II Connector:
3.5 × 1.35mm
Maximum Port II Output:
5A
Output Port III:
5V USB, up to 2.1A
Maximum Combined Output Per Battery:
65W
Charge from an AC Wall Outlet
The included AC charger operates from a standard
100V–240V AC, 50/60Hz power source.
Connect the charger to the BP100's dedicated charging port.
Charge Both Batteries Together
The included split dongle can also be used to connect the AC charger
to both BP100 batteries, allowing both batteries to be charged together.
You May Charge the Battery While Using It
The BP100 can provide power to a connected device while the battery
itself is connected to its charger.
Flexible 12V–24V DC Charging Input
Each BP100 has a built-in charging controller and accepts a
12V–24V DC charging input.
The charging port is a
5.5 × 2.5mm female DC jack.
Charge from a 12V Vehicle Socket
The included car charger allows you to recharge a BP100 battery
from a compatible
12V vehicle cigarette-lighter/accessory socket,
making it convenient for road trips, camping and travel.
Built-In Battery Protection
Each BP100 incorporates an internal protection circuit designed
to help protect the battery against:
✓ Over-Charge Protection
✓ Over-Discharge Protection
✓ Over-Current Protection
✓ Over-Temperature Protection
✓ Short-Circuit Protection
Package Contents
2 × BiXPower BP100 Rechargeable Lithium-Ion Batteries
1 × Special Power Cable for ResMed AirSense 10 / AirCurve 10
1 × 2-to-1 Split Dongle
1 × AC Battery Charger
1 × Car Charger
Runtime Note:
CPAP power consumption can vary substantially depending on therapy pressure,
breathing pattern, mask leakage, humidifier use, heated tubing,
environmental conditions and other machine settings.
Turning off the humidifier and heated tubing can significantly extend battery runtime.
Always use the therapy settings prescribed by your healthcare provider.
CPAP machine is not included.
