High Capacity: This battery capacity is 192
Watt-hour( equivalent to 16Ah @12V, or 14.8V @ 13Ah,
Light Weight: This battery only weighs 2.75 pounds.
A same capacity lead acid battery may weigh 13 pounds and is considerably bigger.
- Nominal Voltage: 14.8 V
- Minimum Voltage: 10V
- Maximum Voltage: 16.8V
Continuous Discharge Current
Maximum Discharge Current
- 5.8" x 4.8" x 2.5" ( 148 x 125 x 62 mm)
Operate Temp. Charge
Operate Temp. Discharge
PCB Safety Function
- Cell balancing
- Over-current protection
- Temperature protection
- Secondary protection
The battery output voltage range is 10V ~ 16.8V, nominal
voltage is 14.8V. When the battery is fully charged, its output voltage
is 16.8V. The output voltage will decrease gradually and finally will
cut off at around 10V. Most of the time, the voltage will be around 14V
Because of this, make sure your device can accept voltage in the 12V ~ 16.8V (DC) range.
Battery with AC Charger:
The battery pack can
be charged the battery from any 100-240V AC power outlet with AC charger.
use the BiXPower authorized charger with correct setting to charge the battery
only. Wrong chargers may damage the battery and can cause fire. This battery charging voltage is 16.8V ~ 17.1V, maximum charging current is 5A. Charge port connector is 5.5x 2.5mm barrel connector with positive polarity.
1. Optional BiXPower DD90X DC to DC Power Adapter for Laptop computers
If your devices, such as laptop computers, need different
voltages, you can use the optional BiXPower
DD90X DC to DC Power converter that can plug into the battery output port and converter the battery output voltage to 12V/15V/16V/18.5V/19.5V/24V with the voltage selection switch. 14 interchangeable connector tips will be included with the optional DD90X DC converter.
It is highly recommended you order this battery with the optional BiXPower DD90X DC to DC power adapter.
This DD90X DC to DC power adapter can also be used to power and charge your
devices from vehicles with 12V or 24V standard cigarette lighters.
It provides up
to 90W of power, which is the sufficient enough to
power most portable electronic devices.
It also has a 5V USB port for charging cell phone, PDA,
2. Optional special DC to DC converter for CPAP Machines:
This battery can work with many CPAP machines with proper DC to DC converters (not included with battery standard package), such as ResMed AirSense 9 or AirSense 10
Battery with optional S9 DC converter.
Battery with optional S10 DC converter.
DC to DC converters are optional and not included with the standard package.
running time for CPAP Machine are:
Respironics & Other 12V CPAP Machines: 2-6 nights
ResMed & Other 24V CPAP Machines: 2-5 nights
*Running times are estimates and vary depending upon device type,
pressure settings, and altitude. Use of of heated humidification or
tubing will significantly reduce expected run times. Older CPAP and
BiLevel machines, which were designed to operate on a higher voltage,
will produce lower average run times than newer models that are designed
to operate at lower voltages.
3. Optional DC to AC Modified Sine Wave AC Power Inverter
Power Inverter is optional, not included in the standard package.
You can also use this battery with our DC to AC power inverter to provide universal 110V AC power. Please note that our DC to AC power inverter is specially designed to accept 10V ~ 17V DC power input. Most car power inverters may only accept 10.5V ~ 15.5V DC power input, which may not work with this battery.
The optional power inverter can convert DC power from this battery or a car cigarette lighter socket into 110V 60Hz AC power, which is similar to the power supplied from your home electrical outlets. Its input side is a car cigarette light plug, which can directly plug into this battery or a car cigarette lighter socket. Its output side is a universal 3-hole AC socket which accept both 2-pin and 3-pin AC plugs.
There are two types of DC to AC power inverters based on the AC power wave form: Modified Sine Wave and Pure Sine Wave.
Most electronics work fine with a modified sine wave. If your device uses a power adapter that changes AC into DC, such as a laptop computer, it’s extremely unlikely that you’ll have any issues. However, anything that uses an AC motor isn’t going to work to full capacity on a modified sine wave. Appliances like refrigerators, microwaves, and compressors that use AC motors won’t run as efficiently on a modified sine wave as they would on a pure sine wave (or your line power at home). In some cases, that may lead to a buildup of excess waste heat that could damage the equipment. You can use these devices with a modified sine wave inverter, but you do so at your own risk.
4. Optional DC to AC Pure Sine Wave AC Power Inverter
The Pure sine wave AC power inverter is bigger, heavier and more expensive compared to the modified sine wave power inveter. However, when compared to the traditional modified sine wave power inverters, AC power in pure sine waves is more similar to commercial power. The
electronic appliances run cleaner, cooler, and quieter when running on pure sine
power. As a result, pure sine inverters save energy costs and extend the life of
The pure sine inverter also reduces electronic interference, making it a
better alternative for operating sensitive audio/video equipment and medical
devices. Appliances with dimmers, speed controls, and certain battery chargers
may require pure sine power to operate.
Do not disassemble the battery pack..
Do not puncture, drop, crush, throw, hit, open, or modify the battery.
Do not let water getting inside the battery.
Do not insert any foreign object into the Output and In port.
Do not expose the battery to heat above 60°C (140°F) or incinerate the battery.
Keep the battery away from children.
Always dispose of used batteries in accordance with local regulations.
If this battery is misused or abused, it can result in personal injury from heat, smoke, fire or explosion.
Obtain approval of airlines or courier companies before traveling with or shipping this battery pack.
Charging: Only use the chargers supplied with the battery or BiXPower authorized chargers to charge the battery. Chargers with incorrect voltage, current, or polarity settings may damage the battery. Please monitor the charging process and react to potential problems that may occur. If you cannot, please make sure to leave it on an isolated fireproof area, away from other flammable materials.
Storage & Handling: DO NOT leave a fully exhausted battery on a shelf. Charge it to least at 50% or more if you do not need to use it for a long time. Do not leave the battery dormant for long periods of time. We recommend using the battery at least once a month. If a battery has not been used for a long period of time, please perform the new battery exercise. Fully discharge and then fully charge the battery at least once every 3 months. Always store the battery in a cool and dry place between 0°C (32 F) and 20°C (70°F), and away from flammable materials.
Fire/Smoke Emission: Batteries contain flammable/combustible material that can be ignited, explode, release toxic materials, cause burns or give off gases when heated or in contact with sparks or flames. In the event of fire, vapor releases, and/or smoke emissions, evacuate the immediate area of all unnecessary personnel.