 |
The BiXPower BX-DD90M2-16V DC to DC Power Converter converts a wide range 10V ~ 30V DC input into stable regulated 16V DC output for powering 16V electronic devices safely and efficiently.
Its compact mini-size design and high conversion efficiency make it ideal for portable, mobile, industrial, solar, automotive, robotics, and off-grid applications. It can operate from batteries, solar power systems, vehicle electrical systems, and many other DC power sources within the supported voltage range.
This converter is suitable for powering laptops, monitors, embedded systems, LED displays, communication equipment, and many other devices requiring stable 16V DC power.
Designed with built-in over-current, over-voltage, and short-circuit protection, the BX-DD90M2-16V helps provide reliable and safe operation for both the converter and connected equipment.
The package comes with a 16AWG Input cable
There are 3 ways to connect to input power:
1. The converter has a 5.5 x 2.5mm female jack that can accept input power directly from a DC power source
2. The enclosed input cable can connector to a DC power source with 5.5 x 2.5mm male connector
3. You may cut off one end of input cable, use two bare wires to connect to a DC power source
Power Converter Features:
Features:
Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm)
Super light weight: only 2.54 oz (72g)
Super high efficiency: up to 96%
Wide DC input range: 10V ~ 30V
Stable regulated 16V DC output
High-efficiency power conversion
Compact lightweight design
Built-in protection circuits
Suitable for battery, solar, vehicle, and portable power applications
Features:
Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm)
Super light weight: only 2.54 oz (72g)
Super high efficiency: up to 95%
A regular DC converter efficiency is around 80% ~ 85%, which means 15% ~ 20% power will be used by the converter itself. For a 85% efficiency rate power adapter to deliver 90W power, it will take 106W power from a power source ( such as a battery). This DC Converter's efficiency rate is up to 95%, which means only around 5% power will be used by the converter itself.
There is a small flat surface on output cable end that has 3 holes. Plug this end to converter output. When plug output cable to converter output port, the flat surface area is face up to converter top.
Other features:
USB 3.0 port can power and charge iPad,iPhone,Nokia and other different smart USB devices
Anti-explosion and anti-fire shell materials,security and ecology
Multiple protections: short circuit, over current, over voltage, over temperature
Specifications:
Acceptable Input Voltage: 10V ~ 30V DC
-Output Voltage: 16V DC
Maximum Output : 90W
-USB output: 5V/3A Max , 9V/2A Max or 12V/1.5A Max
-Dimensions: 2.5" x 1.9" x 0.7" (
63.5 x 48.9 x 16.9mm)
-Weight:
2.54 oz (72g)
-Maximum Operating Temperature verses load current: 0℃ to +40℃ Current 6A max.（ Full Load, the body temperature is 0℃ to +85℃ )
-Minimum Operating Temperature: 0℃
-Operating Relative Humidity range and any qualifiers: 20%RH to 80%RH .
-Maximum Storage Temperature: +70℃
-Minimum Storage Temperature: - 20℃
-Storage Relative Humidity range and any qualifiers: 10%RH to 90%RH non-condensing @ Sea level shall be low 10,000 feet
-Ripple and noise/: ≤300mV
Optional Accessories:1. Extra Output Cable:Output voltage is controlled by special output cable. Beside 24V output voltage, the converter can also output 16V or 19V or 12V output voltage by using different output cable.
 2. Output connector tips:Each output cable output end is a 5.5 x 2.5mm male connector. This 5.5 x 2.5mm connector can be changed to a different connector by plugging a C series connector tip over it. 
3. Input Cable:
The Input Power Cable has a straight 5.5x 2.5mm male connector on both ends. Its length is around 14 inches.
The DC converter Input polarity is positive. Input port is a 5.5 x 2.5mm Female Jack
 Package contents:
BX-DD90M2 90W Mini Size DC to DC Power Adapter x116V Output Cable x 1
Input Cable x 1
|
|
|