 |
Super High Capacity (576 Watt-hour) Battery Pack with UPS (Uninterrupted Power Supply) Function For ResMed AirSense 10 Series CPAP Machine.
You may use the battery independently to power a CPAP machine.
This power pack can power ResMed AirSense 10 CPAP machines for 4 ~ 7 nights with the humidifier turned off. It works with the following AirStart™ 10, AirSense™ 10, and AirCurve™ 10 machines manufactured by ResMed:
• AirStart™ 10 CPAP with HumidAir™ Heated Humidifier
• AirStart™ 10 Auto CPAP with HumidAir™ Heated Humidifier
• AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Charger Port Special Adapter:
Plug the charge port special adapter to battery charge port, it will look like this:
This port can be used and charge port and power output port.
You may use this port to charge battery
You may also use this port to output power:
You may use a split dongle to split the port to two ports:
Then you can charge battery and use the battery as same time:
You may charge the battery and power CPAP machine at same time with split dongle. This will provide a function like a UPS (Uninterrupted Power Supply) system:
The battery AC Charger can supply maximum 4 Amps current, which can fully charge battery from empty in around 7 hours when not using battery. When using battery, the power AC charger will directly pass the power to battery output and at same time use rest power to charge battery. When power demanding is more than AC charger can supply, the battery will provide rest power to meet power demanding.
Battery Features:
24V advanced high-power Lithium Ion battery.
Important: This battery is designed for independent use only. Do not connect this battery with another battery directly in serial or parallel. Connecting this battery with another battery may damage the battery's safety protection and power management circuit board.
Features:
Built-in charge and equalizing protection board to prevent battery from over-charging
Remarkably low self-discharge for extended storage periods up to 2 years.
More than twice the service life of conventional lead acid batteries
No corrosive liquids, nor toxic heavy metals make the Li-On batteries environmentally friendly
Super lightweight: only 3.3 kg (7.3 pounds), less than the 1/4 weight of a similar lead acid battery.
Package comes with two output terminal posts:
If you need large power ( more than 6 Amps) from battery, please get power from output terminals.
Specifications:
Battery Type
|
Lithium Ion
|
Nominal Output Voltage
|
24V
|
Output Voltage Range
|
20V ~ 29.7V
|
|
Capacity
|
- 576 Watt-hour ( 24Ah @ 24V)
|
|
Maximum Continuous Discharge Current
|
|
|
Maximum Burst Discharge Current
|
|
|
Size
|
- 180 x 170 x 75 mm ( or 7" x 6.8" x 3")
|
|
Weight
|
|
|
Operate Temp. Charge
|
|
|
Operate Temp. Discharge
|
|
|
Storage Temp.
|
|
|
Cycle Life
|
|
|
PCB Safety Function
|
- Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
AC Chargers:
Battery comes with a 29.4V 4A AC Charger Package:
Charger Dimensions: 7" x 3" x 1.5". Weight: 1.1 lb.
It can fully charge the battery in around 6 ~ 7 hours.
If you need to charge the battery from a solar panel or car cigarette port, you will need BiXPower DC to DC charger at
Solar panel needs to be able to output 80W or more power. Recommend to use 100W or larger solar panel.
When using this charger, the battery can still output power while it is charging.
This battery output terminals are separated from charge port. Charge battery from charge port only. Do not charge the battery from output terminals. The charger will control charging voltage and current. Internal circuit will provide over charge and over discharge protection, but will not control charge voltage and current.
Optional Carry Bag:
You may order the battery with a carry bag if you need to carry it around.
Battery Output Voltage:
This battery output voltage range is 21V ~ 29.5V. When the battery is fully charged, its output voltage is 29.5V. The output voltage will drop gradually during the discharge process and the final cut off voltage is 21V:
2. Use this battery with Special 24V DC Power Converter for ResMed Airsense 10 devices:
Features:Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm)Super light weight: only 2.54 oz (72g)Super high efficiency: up to 96%Super quiet: Fan-less design
  Specifications:
Input:Input Voltage: 10V ~ 30V DCInput Connector: 5.5 x 2.5mm BarrelConnector Input Polarity: Positive
Output:
Output voltage: 24V DCMaximum output: 90W ( 3.75 Amps @ 24V)Output connector: Special connector for ResMed S10Output cord length: 70" with ferrite
Battery output connection cable with On/Off switch:
Connect output cable to one of 5.5 x 2.5mm Female output port on charger port adapter. Connect charger to another 5.5 x 2.5mm female port.
Package Contents:
Battery x 1
DD90M2 DC Power Converter for ResMed S10 series machines x 1
Battery AC Charger x 1
Connection cable with On/Off switch: x 1
Charge power adapter: x 1
Cautions: Please
use the BiXPower authorized charger with correct setting to charge the battery
only.
Safety Guide Do not disassemble the battery pack..Do not puncture, drop, crush, throw, hit, open, or modify the battery.Do not let water getting inside the battery.Do not insert any foreign object into the Output and In port.Do not expose the battery to heat above 60°C (140°F) or incinerate the battery.Keep the battery away from children.Always dispose of used batteries in accordance with local regulations.If this battery is misused or abused, it can result in personal injury from heat, smoke, fire or explosion.Obtain approval of airlines or courier companies before traveling with or shipping this battery pack.
Charging: Only use the chargers supplied with the battery or BiXPower authorized chargers to charge the battery. Chargers with incorrect voltage, current, or polarity settings may damage the battery. Please monitor the charging process and react to potential problems that may occur. If you cannot, please make sure to leave it on an isolated fireproof area, away from other flammable materials.
Storage & Handling: DO NOT leave a fully exhausted battery on a shelf. Charge it to least at 50% or more if you do not need to use it for a long time. Do not leave the battery dormant for long periods of time. We recommend using the battery at least once a month. If a battery has not been used for a long period of time, please perform the new battery exercise. Fully discharge and then fully charge the battery at least once every 3 months. Always store the battery in a cool and dry place between 0°C (32 F) and 20°C (70°F), and away from flammable materials.
Fire/Smoke Emission: Batteries contain flammable/combustible material that can be ignited, explode, release toxic materials, cause burns or give off gases when heated or in contact with sparks or flames. In the event of fire, vapor releases, and/or smoke emissions, evacuate the immediate area of all unnecessary personnel.
|
|
|