High Capacity: This battery has a capacity of 192
Watt-hours (14.8V @ 13Ah,
or 52000mAh).

Light Weight: This battery only weighs 2.75 pounds. A typical Lead Acid battery with similar capacity would be around 15
pounds.
Specifications:
Model No.
|
|
Chemistry
|
|
Voltage
|
- Nominal Voltage: 14.8 V
- Minimum Voltage: 10V
- Maximum Voltage: 16.8V
|
Capacity
|
|
Continuous Discharge Current
|
|
Maximum Discharge Current
|
|
Size
|
- 5.8" x 4.8" x 2.5" ( 148 x 125 x 62 mm)
|
Weight
|
|
Operate Temp. Charge
|
|
Operate Temp. Discharge
|
|
Storage Temp.
|
|
Cycle Life
|
|
PCB Safety Function
|
- Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
Charging
the
Battery:
The battery pack can
be charged from any 100V ~ 240V AC power outlet with the AC charger.
Caution: Please
use the BiXPower authorized charger with correct settings to charge the battery
only. Wrong chargers may damage the battery and can cause fire. This battery's charging voltage is 16.8V ~ 17.1V, and the maximum charging current is 5A. The charge port connector is a 5.5x 2.5mm barrel connector with positive polarity. If you do not have correct charger for this battery, please order the battery with the
optional
AC charger.
Using the battery The battery pack comes with a output cable. One end plugs into the battery output port and the other end can plug into different connector tips.
The battery output voltage range is 10V ~ 16.8V, nominal voltage is 14.8V. When the battery is fully charged, its output voltage is 16.8V. The output voltage will decrease gradually and finally will cut off at around 10V. Most of the time, the voltage will be around 14V to 16V.
Use the battery with our Special DC to DC Power Converter for ResMed AirSense 10 CPAP MachinesWith the bundled special DC to DC power converter, this battery can provide 24V DC power to ResMed AirSense 10 CPAP Machines.
Special Note: The DC converter will not provide power to the CPAP machine if the battery is off. Please turn on the battery first, then connect the DC converter to CPAP
Machine. Unplug the converter from the CPAP machine when not using the battery.
Package Contents:This CP190-S10 power pack comes with a 192 Watt-hour super high capacity rechargeable lithium ion battery, an AC charger, and a special DC to DC power converter for ResMed AirSense 10 CPAP machines
Warranty: One Year limited warranty. The one year limited
warranty covers manufacturing and quality defects only. Please note that
batteries wear out with use. The amount of charge a battery can hold
gradually decreases due to usage and aging, which is normal, and this is
not the issue covered by warranty.