36V to 24V DC to DC Power Converter

This DC to DC power adapter can convert 36V /48V battery output voltage to 24V DC power. Maximum output 6A (144W). Its input voltage range is between 30V to 60V. Its output voltage is 24V, maximum output current is 6A (144W)

36V Battery Not Included

This DC converter start up voltage is 32V. Its cut off voltage is 29V. This means the converter will start to work when input voltage is 32V or higher. After it starts working, it will keep working until input voltage drop to 29V.

A typical 36V lithium ion battery ( 10 cells in serial) output voltage range is 30V to 42V. A typical 48V lithium ion battery ( 13 cells in serial) output voltage range is 39V to 54.6V. So this converter works for both 36V and 48V lithium ion batteries.

Technical Specifications:

Wide input range: 30V ~ 55V
Start up voltage: 32V
Input Connector: 5.5 x 2.5mm Female
Input Wires: 16AWG, Length: 300mm
Acceptable Input Polarity: Inside Positive
Output Voltage: 24V, Maximum 6A * ( 144W)
Output Connector: 5.5 x 2.5mm Male
Output Wires: 16AWG, length: 900mm
High efficiency ( > 90%)
Small size: 2.98” x 2.98” x 1.3” (74 x 74 x 32.5 mm)
Light weight: 10.2 oz (289g )

*6A is its maximum output current, not actual output current. Actual output current depends on the device's requirements. For example, if your device requires 2 Amps, it will output 2 Amps.

Optional connector tips:

The connector on the power adapter output cable is a 5.5 x 2.5mm male barrel connector, which will work with many devices. If you need different size connectors, you may order our C series optional connector tips separately. A C series connector can plug on the battery output cable to form a new connector.

Optional Input and Output connections:
Optionally, you may cut off the input connector or output connector to use the bare wires as input or output connection.

Red Wire = Positive (+)
Black Wire = Negative (–)

The red color is for Positive and the black color is for Negative/Ground. It is CRITICAL that the power adapter is connected correctly in polarity to the power source: Positive on adapter connects to Positive on power source. Negative on adapter connects to Negative on power source. FAILURE TO DO SO MAY RESULT IN SEVERE DAMAGES.

Safety Protections:

Compare to similar DC converters on market, BiXPower has added many extra safety protection functions on this converter, such as

1. Output over current protection
2. Output over voltage protection
3. Output over load protection, Auto-recovery when device is back to normal operating,
4. Over-temperature.(V) --- Chip IC has the over heating protection function.
5. Output Short Circuit protection

Company

Shopping

My Account

Help

	DC UPS with Multi Output Voltages and High Capacity LiFePO4 Battery - UPS250 US$299.95
	36V /48V DC to 24V DC to DC Power Converter - Type A US$69.95