This DC to DC power converter can convert 10V ~ 32V DC power to USB Type C with Power Delivery (PD) function support. It can output 5V, 9V, 12V, 15V and 20V. Its maximum output can reach 100W, 5A @ 20V.
Specifications:Input : DC 10V- 32VInput Connector: 5.5 x 2.5mm FemaleInput End Cable Length: 8 Inches ( or 200mm)Output : USB Type C with Power Delivery, support 5V, 9V, 12V, 15V, 20V.USB-C Maximum Output Current: 5A (Maximum 100W at 20V) *Output cable length: 1000mm ( or 40 Inches)Size: 78 x 36 x 24mm ( or 3.2" x 1.4" x 1")Weight: 180 g ( or 6.5 oz)
With the USB-C and Power Delivery function, this charger can easily charge your new MacBook at full speed via USB-C to USB-C cable.
Unlike the Micro-USB plug you used on your last phone (a USB-B shape), you can stick in a USB-C cable any which way; either side is "up." No more fumbling around or swearing under your breath when you have trouble plugging in.
Smart & Fast Charging
Intelligently detects your device and delivers the optimal current to connected devices.
Meets new energy efficiency requirements of DOE Level VI - the highest energy efficiency rating.
What is USB Power Delivery?
USB Power Delivery is a single-wire protocol leveraging new USB-C standard & cable. PD (Power Delivery) negotiation allows devices to create a contract to deliver the optimum power level for each application under the current battery conditions. This protocol expands USB output to many different high output voltages, such as 9V, 12V, 15V or 20V ( 20V output voltage works for devices that require 19V to 21V DC power)
Advantages of USB Power Delivery:
- Flexible single wire protocol, enabling enhanced power, data and video
- Dynamic power negotiation: Allows for maximum battery life and performance
- Allows a single port to output different output voltages by negotiation between power source and powered device, such as 9V, or 12V, 15V or 20V.
- Efficient and fast charging over USB
*Special Note: This is just a DC power converter. It itself does not generate any power. To get 60W power output from this power converter, the input power source needs to be able to provide 65W or more power.
Input Connector Size
The input connector size is 5.5 x 2.5mm female: outside diameter is 5.5mm, inside pin diameter is 2.5mm.
If your power source has a 5.5 x 2.1mm male connector, it will not fit the converter input port. You can use BiXPower CNT-X3 connector to change 5.5x2.1mm male to 5.5 x 2.5mm male connector, then it will fit this converter input port, just like this: